Pharmaceutical Spray Dryer
ZLPG-50 High Speed Centrifugal Spray Drying Machine
High speed drying. The surface area of Raw Material liquid increased a lot after atomization through nebulizer, 95%-98% of moisture will be evaporated in high temperature airflow in a flash, only needs seconds time.
Adopts Single position spray drying to make the liquid drop and hot air running in same position. Although the temperature of the air is high, the hot air contacts Liquid Drop once come into drying tank. So the temperature decreased at once to protect the material out of over heated. This is machine is also fit for the materials which are sensitive with Heating.
Because the drying is processed in a flash, so the finished product is Ball Shape with good mobility and good solubility.
The machine is Simple production with easy operation control system used for drying 50-80% moisture contained materials, even some special material with 90% moisture contained can be dried in a flash to powder. Most of the materials no need to be pulverized or sieved again after dried.
All contact parts are made in SS304. for easy checking and operating purpose, all of the controllers and lights are equipped in one controller.
Main technical Data:
Handle amount of raw material liquid
Output of the finished product
Solid content of damp raw material
Ratio of moisture of finished product
Collecting way of product and its efficiency
Two grade cyclone duster or one grade cyclone ducter and one oen grade damp duster≥95%
Air input Temp
Air output Temp
Automatic control meters and instruments
Indicator of temperature of hot air and humidity of air exhaust
Notes: The evaporated amount of moisture is contingent upon the characteristics of the raw material, solid content and temperature of hot air at inlet and outlet. Customers can choose the heating method according to the conditions of the local energy source.